MIL-DTL-62478C(AT)
Table I. Verification methods - Continued.
CI
First
Acceptance
Title
Requirement
Inspection
article
Exam
test
Support and ownership
3.5
4.8
requirements
Paint
3.5.1
4.8.1
X
X
Identification marking
3.5.2
4.8.2
X
X
Safety
3.5.3
4.8.3
X
X
Operating environment
3.6
4.9
requirements
Temperature
3.6.1
4.9.1
X
Temperature shock
3.6.2
4.9.2
X
Humidity
3.6.3
4.9.3
X
Ambient pressure
3.6.4
4.9.4
X
Rain
3.6.5
4.9.5
X
Sand and dust
3.6.6
4.9.6
X
Fungus
3.6.7
4.9.7
X
Vibration
3.6.8
4.9.8
X
Shock
3.6.9
4.9.9
X
4.4 Verification methods. Acceptable verification methods included in this section are
visual inspection and measurement, sample tests, full-scale demonstration tests, simulation,
modeling, engineering evaluation, component properties analysis, and similarity to previously-
approved or previously-qualified designs.
4.4.1 Verification alternatives. The manufacturer may propose alternative test methods,
techniques, or equipment, including the application of statistical process control, tool control, or
cost effective sampling procedures to verify performance. See the contract (see 6.2) for
alternatives that replace verification methods required by this specification.
4.4.2 Verification conditions. Unless otherwise specified (see 6.2), all inspections shall
be conducted under the following conditions:
a. Air temperature: 73 ± 18F (23 ± 10C).
b. Barometric pressure: 28 (+2/-3) in. (725 (+50/-75) mm) of mercury (Hg).
c. Relative humidity: 50 ± 30 percent.
4.5 Design, materials and construction. To determine conformance to 3.2 through 3.2.5,
inspection and material certification records shall be maintained by the contractor providing
proof or verification that design, construction, assembly, processing, and materials conform to
the requirements specified herein. Examination shall be visual, tactile, or by measurement with
Standard Inspection Equipment (SIE). Scratches, digs, bubbles, inclusions, and cement defects
on the optical components shall not exceed the criteria specified within MIL-PRF-13830.
Records shall be subject to review by the Government and shall include date, part or
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business