MIL-S-50725(MU)
4.1.1 General provisions.- The component and subassembly inspection
requirement of MIL-F-13926 form a part of the Quality Assurance Provisions
of this specification. Definitions of inspection terms shall be as listed
in MIL-STD-109.
4.2 First article (initial production) approval.- The requirement for
first article approval and the responsibility (Government or contractor)
for first article testing shall be as specified in the contract. The samp-
le for first article approval tests shall consist of 3 bore sights plus 3
each of all items covered by sQAP. The sample shall be manufactured in
ar production. All parts and materials, including packaging and packing,
shall be obtained from the same source of supply as used in regular pro-
duction.
4.2.1 Government testing.- When the Governemnt is responsible for
conducting first article approval tests, the contractor prior to sub-
mitting the sample to the Government, shall inspect the sample to insure
that it conforms to all the requirements of the contract and submit a re-
cord of this inspection with the sample, including certificates of confor-
mance for materials.
4.2.2 Contractor testing.- When the contractor is responsible for
conducting first article approval tests, the sample shall be inspected
by the contractor for all the requirements of the contract. The sample
and a record of this inspection, `including certificates of conformance
for materials, shall be submitted to the Government for approval. The
Government reserves the right to witness the contractor's inspection.
4.3 Inspection Provisions.
4.3.1 Submission of product.- Unless otherwise specified by the con-
tracting officer, inspection lot size, lot formation and presentation of
lots shall be in accordance with "Submission of Product" provisions of
MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies.- All components and subassem-
blies shell be inspected in accordance with the Inspection provisions
contained in Supplementary Quality Assurance Provisions (SQAP) listed in
the technical data package (TDP). In the absence of SQAP' the applic-
able Quality Assurance Provisions of MIL-F-13926 shall apply. Examination,
and tests related to Section 3 herein shall be performed on a single de-
fect (individual characteristic) basis in accordance with MIL-STD-105 and
the sampling plans specified in Tables I, II and III herein. Examination
and tests for packaging, packing, and marking shall be in accordance with
MIL-P-14232 and Section 5 herein. The tabulated classification of defects
in Table I, II and III shall constitute the minimum inspection to be per-
formed by the supplier after first article approval and prior to Govern-
ment acceptance or rejection by item or lot.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business