MIL-S-50725 (MU)
TABLE I - CLASSIFICATION OF DEFECTS
TEST PROCEDURE
REQUIREMENT
CLASS
CRITICAL: NONE
AQL 0.65% Defective
MAJOR:
3.6.1
4.6.2
101.
Collimation
4.6.4
3.6.3
102.
Inverted level vial
4.6.5
3.6.4
103.
Elevation level vial
4.6.6
3.7
104.
Telescope travel
3.8.1
4.6.8
105.
Clamp screw (60° to 90°F)
3.9
4.6.9
106.
Torque (60° to 90°F)
4.6.10
3.10
107.
Strap assembly
4.6.3
3.6.2
Plumb travel
108.
None Defined
MINOR:
NOTE: The tests in Table I shall be conducted at a temperature be-
tween +60 and +90°F.
4.3.3 Acceptance and rejection.- Rejected lots shall be screened for
all defective characteristics. Removal or correction of defective units
and readmittance of rejected lots shall be in accordance with "Accept-
ance and Rejection" as specified in MXL-STD-105.
4.3.4 Certification.- Certification for Telescope, Elbow Assembly,
10548042-2 shall include test data and results for each requirement speci-
fied in MIL-T-46324 to insure compliance with 3.4. Certification shall
be provided prior to performing final acceptance inspection for the bore
sight and remain in effect throughout the contract for Government accep-
tance. This does not relieve the contractor from inspection throughout
the contract production, including recording data and results therefrom.
Recorded data and results shall be made available to the Government upon
request. A new certification will be required should any changes occur
in materials, manufacturing processes and techniques previously certified.
4.4
Special sampling.
4.4.1 General.- Three bore sights shall be selected at random as a
special sample from each 100 produced. The sample shall meet the require-
ments and tests in Table II.
TABLE II
CHARACTERISTIC
TEST PROCEDURES
REQUIREMENTS
Applicable Drawings -
3.1
301.
Materials
visual
Applicable Drawings -
3.2
302. Fabrication
Visual
MIL-F-13926 - Visual
3.3
303 l
General specification
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business