INCH-POUND
MIL-DTL-48550A
16 August 2012
SUPERSEDING
MIL-C-48550(AR)
15 August 1978
DETAIL SPECIFICATION
COLLIMATOR, INFINITY AIMING REFERENCE - M1A2
Reactivated after 16 August 2012 and may be used for new and existing
designs and acquisitions
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers the Collimator, Infinity Aiming Reference:
M1A2, which consists of a collimator with integral tripod and cover. This equipment is
referenced throughout this specification as "Collimator."
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4
of this specification. This section does not include documents in other sections of this
specification or recommended for additional information or as examples. While every
effort has been made to ensure the completeness of this list, document users are cautioned
that they must meet all requirements of documents cited in sections 3 and 4 of this
specification, whether or not documents are listed in this section.
Comments, suggestions, or questions on this document should be addressed to:
Commander, US Army ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, New Jersey
07806-5000 or emailed to picaardecstdznbranch@conus.army.mil. Since contact
information can change, you may want to verify the currency of this address information
using the ASSIST online database at https://assist.dla.mil.
AMSC N/A
FSC 1240
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business