MIL-DTL-48550A
shall again be examined to determine any detrimental effects or indication of poor
workmanship in accordance with the requirements of 3.7.10.
4.7.11 Strap security. The test shall be accomplished with a standard pull weight
scale attached to the strap and subjected to a direct pull as indicated in 3.7.11. After
completion of the test, the strap shall be visually examined for any slippage, or looseness of
rivets to determine compliance with the requirements of 3.7.11.
4.7.12 Gasket. The gasket shall have a visual and tactile examination to assure that
there is proper adhesion to the cover as specified in 3.7.12.
4.8 Workmanship. Workmanship of the collimator shall be confirmed in
accordance with the verifications of MIL-F-13926.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as
specified in the contract or order (see 6.2). When packaging of materiel is to be performed
by DoD or in-house contractor personnel, these personnel need to contact the responsible
packaging activity to ascertain packaging requirements. Packaging requirements are
maintained by the Inventory Control Point's packaging activities within the Military
Service or Defense Agency, or within the military service's system commands. Packaging
data retrieval is available from the managing Military Department's or Defense Agency's
automated packaging files, CD-ROM products, or by contacting the responsible packaging
activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be
helpful, but is not mandatory.)
6.1 Intended use. The Collimator Infinity Aiming Reference, M1A2 is an optical
instrument on a tripod with a protective cover, intended to be used for laying field artillery
weapons for indirect fire by establishing an optical reference from which weapon
deflection angles can be measured. It has an illuminated mil scale reticle which functions
as an optical projection system that simulates a grid board type of infinity target reference.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number and date of this specification.
b. Selection of an applicable level of preservation, packaging, and packing in
accordance with MIL-STD-2073-1, Department of Defense Standard Practice
for Military Packaging.
c. Packaging Data Sheet, SPI12984644, as applicable (See 6.5).
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business