MIL-C-48605A (AR)
4.4
Quality conformance inspection.
4.4.1 Inspection lot formation. The term "inspection lot" is
defined as a homogeneous collection of units of product from which a
representative sample is drawn or which is inspected 100 percent to
determine conformance with applicable requirements. Units of
product selected for inspection shall represent only the inspection
lot from which they are drawn and shall not be construed to repre-
sent any prior or subsequent quantities presented for inspection.
Homogeneity shall be considered to exist provided the inspection lot
has been produced by one manufacturer, in one unchanged process,
using the same materials and methods, in accordance with the same
drawings, same drawing revisions, same specifications and same
specification revisions. All material submitted for inspection in
accordance with this specification shall comply with the homogeneity
criteria specified herein, regardless of the type of inspection
procedure which is being applied to determine conformance with
requirements.
4.4.2 Examinations and tests.
4.4.2.1 Components, assemblies and subassemblies. All
components, assemblies and subassemblies shall be inspected in
accordance with the inspection provisions contained in this
specification and the Quality Assurance Provisions (QAP) listed in
the Technical Data Package (TDP). In the absence of QAP's, the
applicable quality assurance provisions of MIL-F-13926 shall apply.
4.4.2.2 Final acceptance inspection. Subsequent to first
article approval, examination and tests related to section 3 herein
shall be performed in accordance with the sampling plans specified
in 4.4.2.3 herein. Examination and test for packaging and marking
shall be in accordance with sections herein. The tabulated
classification of defects in 4.4.2.3 shall constitute the minimum
inspection to be performed by the contractor after first article
approval and prior to Government acceptance or rejection by item or
lot.
4.4.2.3 Functional tests.
The tests in Table XIII shall be
performed on a 100% basis.
20
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business